Atlas
Single-Leg Leg Extension: starting position Single-Leg Leg Extension: end position

Knee Extension · Quads

Single-Leg Leg Extension

A knee extension exercise that works the quads. Beginner level, using machine.

The single-leg leg extension is the unilateral version of the machine leg extension: you straighten one knee against the roller while the other leg rests. It helps you spot and fix strength differences between legs and focus on each quad individually. It suits beginners, hypertrophy training and anyone looking to balance both sides.

BeginnerMachineGym

Muscles worked

PrimaryQuads

It works the quads of the active leg, with heavy rectus femoris involvement thanks to the seated position. Working one leg at a time also makes it easier to feel the vastus medialis near the knee at the top.

Setup and loading

Adjust the backrest so your knee lines up with the machine pivot and set the roller just above the ankle of the working leg. Use a bit less than half the weight you lift with both legs and aim for 10 to 15 controlled reps.

How to do the single-leg leg extension step by step

  1. Sit with your back on the pad, align your knee with the machine pivot and place the roller above one ankle.
  2. Let the other leg relax outside the roller and grip the handles to lock your hips in place.
  3. Exhale and extend your knee until it is nearly straight, without twisting your hips or lifting off the seat.
  4. Squeeze your quad for one second at the top with your foot in a neutral position.
  5. Inhale and lower slowly over two to three seconds to about 90 degrees of knee bend.
  6. Finish your reps on one leg and switch, always starting with your weaker side.

Form cues

  • Hips still and square, no twisting to one side
  • Squeeze for one second at the top every rep
  • Same reps and same weight on both legs
  • Lower slowly and control the weight stack

Common mistakes

  • Twisting your hips to lift: your torso compensates; reduce the weight.
  • Using your two-leg weight: form breaks down; drop to less than half.
  • Starting with your strong leg: the weak one ends up strained; start weak and match reps.
  • Bouncing at the bottom: you lose tension; stop just before the plates touch.

How to make it easier or harder

To make it easier, do seated knee extensions on a chair with a light ankle weight. To progress, add long top holds, four-second eccentrics or lift with both legs and lower with one.

Advertisement

Sets and reps for your goal

Hypertrophy

3 x 10-15 · rest 60 s

3-4 sets of 6-12 reps (up to 15-20 on isolation exercises) at 65-80% of your max. Rest 1 to 2 minutes.

Get close to failure (0-3 reps in reserve) and control the lowering for 2-3 seconds. Accumulate 10-20 sets per muscle per week.

A guide for healthy adults. Adjust the load to your level and see a professional if you have an injury.

Check your form

Film yourself from the side or ask someone to watch, then tick what you get right.

0 of 4

Frequently asked questions

Why do single-leg leg extensions?

They show whether one leg is stronger than the other and train each quad without the dominant side taking over. They also improve mind muscle connection and help after periods when one leg was used less.

How much weight should I use on single-leg extensions?

Usually a little less than half the weight you use with both legs, since stability and machine leverage change. Pick a load that allows 10 to 15 reps with a top pause and no hip twisting.

Sports it suits

Variations and similar exercises

Advertisement