Atlas
Wide-Grip Barbell Bench Press: starting position Wide-Grip Barbell Bench Press: end position

Horizontal Push · Chest

Wide-Grip Barbell Bench Press

A horizontal push exercise that works the chest. Intermediate level, using barbell & rack.

The wide-grip barbell bench press places your hands well outside a standard bench grip, usually near the outer rings on the bar. Shortening the bar path and opening your arms puts more work on your chest and less on your triceps. It is an intermediate variation for lifters who already have solid bench technique and healthy shoulders.

IntermediateBarbell & rackGym

Muscles worked

PrimaryChest
SecondaryShoulders, Triceps

Your pecs do most of the work because your upper arm moves in a wider plane. Your front delts assist and your triceps contribute less than with a medium or close grip.

Setup and loading

Grip the bar about one and a half times shoulder width, with your index fingers no wider than the outer rings. Start a bit lighter than your usual bench for 6 to 10 reps, and train with a spotter or safety arms.

How to do the wide-grip barbell bench press step by step

  1. Lie with your eyes under the bar, feet planted, and shoulder blades pulled back and down.
  2. Take a wide overhand grip about one and a half times shoulder width with your wrists stacked straight.
  3. Unrack the bar with straight arms and bring it over the middle of your chest.
  4. Breathe in, brace your abs, and lower the bar under control to mid chest with your forearms vertical.
  5. Breathe out and press the bar up and slightly back until your arms are straight.
  6. At the end of the set, return the bar to the rack with straight arms before letting go.

Form cues

  • Shoulder blades pinned and chest up despite the wide grip
  • Forearms vertical even with your hands spread wide
  • Control the bottom with a light touch, no bouncing
  • Feet planted and glutes on the bench

Common mistakes

  • Grip so wide it bothers your shoulders: stresses the joint; stay inside the outer rings.
  • Elbows flared fully to 90 degrees: loads your shoulders; tuck them in slightly.
  • Bouncing the bar off your chest: you lose tension and control; touch lightly and press.
  • Shoulder blades coming loose: leaves your shoulders unstable; keep them pinned all set.

How to make it easier or harder

As a regression, use a medium-grip bench press or a machine press to learn the pattern with less shoulder stress. To progress, add paused reps on your chest or rotate in dumbbell presses for more range and control.

Advertisement

Sets and reps for your goal

Hypertrophy

3-4 x 8-12 · rest 60-90 s

3-4 sets of 6-12 reps (up to 15-20 on isolation exercises) at 65-80% of your max. Rest 1 to 2 minutes.

Get close to failure (0-3 reps in reserve) and control the lowering for 2-3 seconds. Accumulate 10-20 sets per muscle per week.

Max Strength

4-5 x 3-6 · rest 2-3 min

3-6 sets of 1-6 reps at 80-90% of your max (1RM). Rest 2 to 5 minutes.

Leave 1-3 reps in reserve. If your technique breaks down, lower the weight: strength is built with good reps.

A guide for healthy adults. Adjust the load to your level and see a professional if you have an injury.

Check your form

Film yourself from the side or ask someone to watch, then tick what you get right.

0 of 4

Frequently asked questions

Does a wide-grip bench press work the chest more?

Yes, slightly. A wider grip puts more load on your pecs and less on your triceps, and the bar travels a shorter distance. In return your shoulders work in a more demanding position, so do not overdo the width.

What bench press grip width is safe?

For most people, about one and a half to two times shoulder width, staying inside the outer rings of the bar. If the front of your shoulder hurts, bring your grip in an inch or two.

Sports it suits

Gear for this exercise

  • Olympic barbell and platesTo keep progressing on the big lifts with heavy loads.

As an Amazon Associate, Muscle Atlas earns from qualifying purchases.

Variations and similar exercises

Advertisement